SDTInfo (Bio-Formats API)

java.lang.Object
- loci.formats.in.SDTInfo

```
public class SDTInfo
extends Object
```
SDTInfo encapsulates the header information for Becker & Hickl SPC-Image SDT files.

Author:

Curtis Rueden ctrueden at wisc.edu

Field Summary

Fields
Modifier and Type	Field and Description
`short`	`accumulate`
`short`	`adcDE` ADC sample delay (SPC-930).
`short`	`adcRE`
`int`	`adcZoom`
`long[]`	`allBlockLengths`
`long[]`	`allBlockOffsets`
`static short`	`BH_HEADER_CHKSUM`
`static short`	`BH_HEADER_NOT_VALID`
`static short`	`BH_HEADER_VALID`
`static String`	`BINARY_SETUP`
`long`	`blockLength` reserved2 now contains block (set) length.
`short`	`blockNo` Number of the block in the file.
`int`	`blockType` See blockType defines below.
`int`	`bordL`
`int`	`bordU`
`static String`	`C_STRING`
`long`	`calcPhotons` No of photons.
`float`	`cfdHF`
`float`	`cfdLH`
`float`	`cfdLL`
`float`	`cfdZC`
`int`	`chan` Routing channel number.
`int`	`channels`
`int`	`chksum`
`float`	`colT`
`float`	`cortime` Correlation time [ms].
`int`	`crossChan` Cross FCS routing channel number when chan = crossChan and mod == crossMod - Auto FCS otherwise - Cross FCS.
`int`	`crossMod` Cross FCS module number.
`long`	`crossMtResol` Macro time clock of cross FCS module in 0.1 ns units.
`int`	`curCycle` Current cycle (accumulation cycle in FLOW mode) - (if multi-cycle measurement).
`int`	`curPage` Current measured page.
`int`	`curStep` Current step (if multi-step measurement).
`int`	`cycles` Cycles (accumulation cycles in FLOW mode).
`static String`	`DATA_IDENTIFIER` For normal .sdt files (setup + data).
`int`	`dataBlockLength`
`int`	`dataBlockOffs` Offset of the first data block.
`int`	`dataOffs` Offset of the data block from the beginning of the file.
`String`	`date` Date of creation.
`short`	`deadTimeComp`
`short`	`detType` Detector type (SPC-930 in camera mode).
`short`	`dither`
`static String`	`DLL_DATA_IDENTIFIER` For .sdt files created using DLL function SPC_save_data_to_sdtfile (no setup, only data).
`short`	`ealDE`
`float`	`endTime` Macro time of the last photon.
`int`	`epxDiv`
`static String`	`FCS_DATA_IDENTIFIER` For .sdt files created in FIFO mode (setup, data blocks = Decay, FCS, FIDA, FILDA & MCS curves for each used routing channel).
`int`	`fcsDecayCalc` Bit 0 = 1 - decay curve calculated.
`int`	`fcsPoints` No of FCS values.
`int`	`fcsType` 0 - linear FCS with log binning (100 bins/log) when bit 15 = 1 (0x8000) - Multi-Tau FCS where bits 14-0 = ktau parameter.
`int`	`fidaPoints` No of FIDA values.
`float`	`fidaTime` Interval time [ms] for FIDA histogram.
`short`	`fifoTyp`
`int`	`fildaPoints` No of FILDA values.
`float`	`fildaTime` Interval time [ms] for FILDA histogram.
`int`	`flags` Scan clocks bits 2-0 (frame, line, pixel), rates_read - bit 15.
`int`	`flbckX`
`int`	`flbckY`
`static String`	`FLOW_DATA_IDENTIFIER` For .sdt files created automatically in Continuous Flow mode measurement (no setup, only data).
`boolean`	`hasExtendedMeasureInfo`
`boolean`	`hasMeasFCSInfo`
`boolean`	`hasMeasHISTInfo`
`boolean`	`hasMeasStopInfo`
`boolean`	`hasMeasureInfo`
`int`	`headerValid`
`int`	`height`
`int`	`imageRX`
`int`	`imageRY`
`int`	`imageX` 4 subsequent fields valid only for Camera mode or FIFO_IMAGE mode.
`int`	`imageY`
`short`	`incr`
`String`	`info`
`short`	`infoLength` Length of the info part.
`int`	`infoOffs` Offset of the info part which contains general text information (Title, date, time, contents etc.).
`long`	`lblockNo` Long blockNo - see remarks below.
`short`	`linediv` Line predivider = 2 ** (linediv).
`short`	`masterClock` Use or not Master Clock (SPC140 multi-module).
`float`	`maxAdcRate`
`float`	`maxCfdRate` (-1.0 - not set).
`float`	`maxSyncRate` Maximum rates during the measurement.
`float`	`maxTacRate`
`int`	`mcsPoints` No of MCS values.
`int`	`mcstaPoints` Number of MCS_TA points.
`float`	`mcsTime` Interval time [ms] for MCS histogram.
`short`	`measDescBlockLength`
`short`	`measDescBlockNo` Number of the measurement description block corresponding to this data block.
`int`	`measDescBlockOffs`
`short`	`measMode`
`short`	`memBank`
`float`	`minAdcRate`
`float`	`minCfdRate` (-1.0 - not set).
`float`	`minSyncRate` Minimum rates during the measurement.
`float`	`minTacRate`
`int`	`mod` Module number.
`int`	`modFpgaVer` New in v.8.4.
`String`	`modSerNo` Serial number of the module.
`String`	`modType` Module type.
`int`	`modTypeCode`
`int`	`mReserved1`
`float`	`mReserved2`
`long`	`mtResol` Macro time clock in 0.1 ns units.
`short`	`ncx`
`short`	`ncy`
`int`	`nextBlockOffs` Offset to the data block header of the next data block.
`short`	`noOfDataBlocks` no_of_data_blocks valid only when in 0 ..
`short`	`noOfMeasDescBlocks`
`float`	`offset`
`int`	`overfl`
`float`	`overflowCorrFactor`
`int`	`overruns` No of Fifo overruns when > 0 fcs curve & endTime are not valid.
`int`	`page`
`short`	`pixClk`
`float`	`pixTime`
`short`	`polarityF`
`short`	`polarityL` 2 = disabled line markers.
`short`	`polarityP`
`float`	`repT`
`long`	`reserved1`
`int`	`reserved2`
`short`	`revision` Software revision number (lower 4 bits >= 10(decimal)).
`int`	`scanRX`
`int`	`scanRY`
`int`	`scanX`
`int`	`scanY`
`String`	`setup`
`static String`	`SETUP_IDENTIFIER` For .set files (setup only).
`short`	`setupLength` Length of the setup data.
`int`	`setupOffs` Offset of the setup text data (system parameters, display parameters, trace parameters etc.).
`int`	`status` Last SPC_test_state return value (status).
`int`	`steps`
`short`	`stopt`
`float`	`stopTime` Time from start to - disarm (simple measurement) - or to the end of the cycle (for complex measurement).
`short`	`synFD`
`float`	`synHF`
`float`	`synTH`
`float`	`synZC`
`static String`	`T_STRING`
`short`	`tacG`
`float`	`tacLH`
`float`	`tacLL`
`float`	`tacOF`
`float`	`tacR`
`String`	`time` Time of creation.
`int`	`timeBins`
`int`	`timepoints`
`short`	`trigger`
`short`	`useMotor`
`int`	`width`
`static String`	`X_IMG_STRING`
`static String`	`X_STRING`
`short`	`xAxis` X axis representation (SPC-930).
`short`	`xyGain` Gain for XY ADCs (SPC930).
`static String`	`Y_IMG_STRING`
`static String`	`Y_STRING`

Constructor Summary

Constructors
Constructor and Description
`SDTInfo(loci.common.RandomAccessInputStream in, Hashtable meta)` Constructs a new SDT header by reading values from the given input source, populating the given metadata table.

Method Summary

All Methods Instance Methods Concrete Methods
Modifier and Type Method and Description

private long readUnsignedLong(loci.common.RandomAccessInputStream in)
- Methods inherited from class java.lang.Object
  clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

All Methods Instance Methods Concrete Methods
Modifier and Type	Method and Description
`private long`	`readUnsignedLong(loci.common.RandomAccessInputStream in)`

- Field Detail
  - BH_HEADER_CHKSUM
```
public static final short BH_HEADER_CHKSUM
```
    See Also:
    
    Constant Field Values
  - BH_HEADER_NOT_VALID
```
public static final short BH_HEADER_NOT_VALID
```
    See Also:
    
    Constant Field Values
  - BH_HEADER_VALID
```
public static final short BH_HEADER_VALID
```
    See Also:
    
    Constant Field Values
  - SETUP_IDENTIFIER
```
public static final String SETUP_IDENTIFIER
```
    For .set files (setup only).
    
    See Also:
    
    Constant Field Values
  - DATA_IDENTIFIER
```
public static final String DATA_IDENTIFIER
```
    For normal .sdt files (setup + data).
    
    See Also:
    
    Constant Field Values
  - FLOW_DATA_IDENTIFIER
```
public static final String FLOW_DATA_IDENTIFIER
```
    For .sdt files created automatically in Continuous Flow mode measurement (no setup, only data).
    
    See Also:
    
    Constant Field Values
  - DLL_DATA_IDENTIFIER
```
public static final String DLL_DATA_IDENTIFIER
```
    For .sdt files created using DLL function SPC_save_data_to_sdtfile (no setup, only data).
    
    See Also:
    
    Constant Field Values
  - FCS_DATA_IDENTIFIER
```
public static final String FCS_DATA_IDENTIFIER
```
    For .sdt files created in FIFO mode (setup, data blocks = Decay, FCS, FIDA, FILDA & MCS curves for each used routing channel).
    
    See Also:
    
    Constant Field Values
  - X_STRING
```
public static final String X_STRING
```
    See Also:
    
    Constant Field Values
  - Y_STRING
```
public static final String Y_STRING
```
    See Also:
    
    Constant Field Values
  - T_STRING
```
public static final String T_STRING
```
    See Also:
    
    Constant Field Values
  - C_STRING
```
public static final String C_STRING
```
    See Also:
    
    Constant Field Values
  - X_IMG_STRING
```
public static final String X_IMG_STRING
```
    See Also:
    
    Constant Field Values
  - Y_IMG_STRING
```
public static final String Y_IMG_STRING
```
    See Also:
    
    Constant Field Values
  - BINARY_SETUP
```
public static final String BINARY_SETUP
```
    See Also:
    
    Constant Field Values
  - width
```
public int width
```
  - height
```
public int height
```
  - timeBins
```
public int timeBins
```
  - channels
```
public int channels
```
  - timepoints
```
public int timepoints
```
  - revision
```
public short revision
```
    Software revision number (lower 4 bits >= 10(decimal)).
  - infoOffs
```
public int infoOffs
```
    Offset of the info part which contains general text information (Title, date, time, contents etc.).
  - infoLength
```
public short infoLength
```
    Length of the info part.
  - setupOffs
```
public int setupOffs
```
    Offset of the setup text data (system parameters, display parameters, trace parameters etc.).
  - setupLength
```
public short setupLength
```
    Length of the setup data.
  - dataBlockOffs
```
public int dataBlockOffs
```
    Offset of the first data block.
  - noOfDataBlocks
```
public short noOfDataBlocks
```
    no_of_data_blocks valid only when in 0 .. 0x7ffe range, if equal to 0x7fff the field 'reserved1' contains valid no_of_data_blocks.
  - dataBlockLength
```
public int dataBlockLength
```
  - measDescBlockOffs
```
public int measDescBlockOffs
```
  - noOfMeasDescBlocks
```
public short noOfMeasDescBlocks
```
  - measDescBlockLength
```
public short measDescBlockLength
```
  - headerValid
```
public int headerValid
```
  - reserved1
```
public long reserved1
```
  - reserved2
```
public int reserved2
```
  - chksum
```
public int chksum
```
  - info
```
public String info
```
  - setup
```
public String setup
```
  - hasMeasureInfo
```
public boolean hasMeasureInfo
```
  - time
```
public String time
```
    Time of creation.
  - date
```
public String date
```
    Date of creation.
  - modSerNo
```
public String modSerNo
```
    Serial number of the module.
  - measMode
```
public short measMode
```
  - cfdLL
```
public float cfdLL
```
  - cfdLH
```
public float cfdLH
```
  - cfdZC
```
public float cfdZC
```
  - cfdHF
```
public float cfdHF
```
  - synZC
```
public float synZC
```
  - synFD
```
public short synFD
```
  - synHF
```
public float synHF
```
  - tacR
```
public float tacR
```
  - tacG
```
public short tacG
```
  - tacOF
```
public float tacOF
```
  - tacLL
```
public float tacLL
```
  - tacLH
```
public float tacLH
```
  - adcRE
```
public short adcRE
```
  - ealDE
```
public short ealDE
```
  - ncx
```
public short ncx
```
  - ncy
```
public short ncy
```
  - page
```
public int page
```
  - colT
```
public float colT
```
  - repT
```
public float repT
```
  - stopt
```
public short stopt
```
  - overfl
```
public int overfl
```
  - useMotor
```
public short useMotor
```
  - steps
```
public int steps
```
  - offset
```
public float offset
```
  - dither
```
public short dither
```
  - incr
```
public short incr
```
  - memBank
```
public short memBank
```
  - modType
```
public String modType
```
    Module type.
  - synTH
```
public float synTH
```
  - deadTimeComp
```
public short deadTimeComp
```
  - polarityL
```
public short polarityL
```
    2 = disabled line markers.
  - polarityF
```
public short polarityF
```
  - polarityP
```
public short polarityP
```
  - linediv
```
public short linediv
```
    Line predivider = 2 ** (linediv).
  - accumulate
```
public short accumulate
```
  - flbckY
```
public int flbckY
```
  - flbckX
```
public int flbckX
```
  - bordU
```
public int bordU
```
  - bordL
```
public int bordL
```
  - pixTime
```
public float pixTime
```
  - pixClk
```
public short pixClk
```
  - trigger
```
public short trigger
```
  - scanX
```
public int scanX
```
  - scanY
```
public int scanY
```
  - scanRX
```
public int scanRX
```
  - scanRY
```
public int scanRY
```
  - fifoTyp
```
public short fifoTyp
```
  - epxDiv
```
public int epxDiv
```
  - modTypeCode
```
public int modTypeCode
```
  - modFpgaVer
```
public int modFpgaVer
```
    New in v.8.4.
  - overflowCorrFactor
```
public float overflowCorrFactor
```
  - adcZoom
```
public int adcZoom
```
  - cycles
```
public int cycles
```
    Cycles (accumulation cycles in FLOW mode).
  - hasMeasStopInfo
```
public boolean hasMeasStopInfo
```
  - status
```
public int status
```
    Last SPC_test_state return value (status).
  - flags
```
public int flags
```
    Scan clocks bits 2-0 (frame, line, pixel), rates_read - bit 15.
  - stopTime
```
public float stopTime
```
    Time from start to - disarm (simple measurement) - or to the end of the cycle (for complex measurement).
  - curStep
```
public int curStep
```
    Current step (if multi-step measurement).
  - curCycle
```
public int curCycle
```
    Current cycle (accumulation cycle in FLOW mode) - (if multi-cycle measurement).
  - curPage
```
public int curPage
```
    Current measured page.
  - minSyncRate
```
public float minSyncRate
```
    Minimum rates during the measurement.
  - minCfdRate
```
public float minCfdRate
```
    (-1.0 - not set).
  - minTacRate
```
public float minTacRate
```
  - minAdcRate
```
public float minAdcRate
```
  - maxSyncRate
```
public float maxSyncRate
```
    Maximum rates during the measurement.
  - maxCfdRate
```
public float maxCfdRate
```
    (-1.0 - not set).
  - maxTacRate
```
public float maxTacRate
```
  - maxAdcRate
```
public float maxAdcRate
```
  - mReserved1
```
public int mReserved1
```
  - mReserved2
```
public float mReserved2
```
  - hasMeasFCSInfo
```
public boolean hasMeasFCSInfo
```
  - chan
```
public int chan
```
    Routing channel number.
  - fcsDecayCalc
```
public int fcsDecayCalc
```
    Bit 0 = 1 - decay curve calculated. Bit 1 = 1 - fcs curve calculated. Bit 2 = 1 - FIDA curve calculated. Bit 3 = 1 - FILDA curve calculated. Bit 4 = 1 - MCS curve calculated. Bit 5 = 1 - 3D Image calculated.
  - mtResol
```
public long mtResol
```
    Macro time clock in 0.1 ns units.
  - cortime
```
public float cortime
```
    Correlation time [ms].
  - calcPhotons
```
public long calcPhotons
```
    No of photons.
  - fcsPoints
```
public int fcsPoints
```
    No of FCS values.
  - endTime
```
public float endTime
```
    Macro time of the last photon.
  - overruns
```
public int overruns
```
    No of Fifo overruns when > 0 fcs curve & endTime are not valid.
  - fcsType
```
public int fcsType
```
    0 - linear FCS with log binning (100 bins/log) when bit 15 = 1 (0x8000) - Multi-Tau FCS where bits 14-0 = ktau parameter.
  - crossChan
```
public int crossChan
```
    Cross FCS routing channel number when chan = crossChan and mod == crossMod - Auto FCS otherwise - Cross FCS.
  - mod
```
public int mod
```
    Module number.
  - crossMod
```
public int crossMod
```
    Cross FCS module number.
  - crossMtResol
```
public long crossMtResol
```
    Macro time clock of cross FCS module in 0.1 ns units.
  - hasExtendedMeasureInfo
```
public boolean hasExtendedMeasureInfo
```
  - imageX
```
public int imageX
```
    4 subsequent fields valid only for Camera mode or FIFO_IMAGE mode.
  - imageY
```
public int imageY
```
  - imageRX
```
public int imageRX
```
  - imageRY
```
public int imageRY
```
  - xyGain
```
public short xyGain
```
    Gain for XY ADCs (SPC930).
  - masterClock
```
public short masterClock
```
    Use or not Master Clock (SPC140 multi-module).
  - adcDE
```
public short adcDE
```
    ADC sample delay (SPC-930).
  - detType
```
public short detType
```
    Detector type (SPC-930 in camera mode).
  - xAxis
```
public short xAxis
```
    X axis representation (SPC-930).
  - hasMeasHISTInfo
```
public boolean hasMeasHISTInfo
```
  - fidaTime
```
public float fidaTime
```
    Interval time [ms] for FIDA histogram.
  - fildaTime
```
public float fildaTime
```
    Interval time [ms] for FILDA histogram.
  - fidaPoints
```
public int fidaPoints
```
    No of FIDA values.
  - fildaPoints
```
public int fildaPoints
```
    No of FILDA values.
  - mcsTime
```
public float mcsTime
```
    Interval time [ms] for MCS histogram.
  - mcsPoints
```
public int mcsPoints
```
    No of MCS values.
  - mcstaPoints
```
public int mcstaPoints
```
    Number of MCS_TA points.
  - blockNo
```
public short blockNo
```
    Number of the block in the file. Valid only when in 0..0x7ffe range, otherwise use lblock_no field obsolete now, lblock_no contains full block no information.
  - dataOffs
```
public int dataOffs
```
    Offset of the data block from the beginning of the file.
  - nextBlockOffs
```
public int nextBlockOffs
```
    Offset to the data block header of the next data block.
  - allBlockOffsets
```
public long[] allBlockOffsets
```
  - allBlockLengths
```
public long[] allBlockLengths
```
  - blockType
```
public int blockType
```
    See blockType defines below.
  - measDescBlockNo
```
public short measDescBlockNo
```
    Number of the measurement description block corresponding to this data block.
  - lblockNo
```
public long lblockNo
```
    Long blockNo - see remarks below.
  - blockLength
```
public long blockLength
```
    reserved2 now contains block (set) length.
- Constructor Detail
  - SDTInfo
```
public SDTInfo(loci.common.RandomAccessInputStream in,
               Hashtable meta)
        throws IOException
```
    Constructs a new SDT header by reading values from the given input source, populating the given metadata table.
    
    Throws:
    
    IOException
- Method Detail
  - readUnsignedLong
```
private long readUnsignedLong(loci.common.RandomAccessInputStream in)
                       throws IOException
```
    Throws:
    
    IOException

Class SDTInfo

Field Summary

Constructor Summary

Method Summary

Methods inherited from class java.lang.Object

Field Detail

BH_HEADER_CHKSUM

BH_HEADER_NOT_VALID

BH_HEADER_VALID

SETUP_IDENTIFIER

DATA_IDENTIFIER

FLOW_DATA_IDENTIFIER

DLL_DATA_IDENTIFIER

FCS_DATA_IDENTIFIER

X_STRING

Y_STRING

T_STRING

C_STRING

X_IMG_STRING

Y_IMG_STRING

BINARY_SETUP

width

height

timeBins

channels

timepoints

revision

infoOffs

infoLength

setupOffs

setupLength

dataBlockOffs

noOfDataBlocks

dataBlockLength

measDescBlockOffs

noOfMeasDescBlocks

measDescBlockLength

headerValid

reserved1

reserved2

chksum

info

setup

hasMeasureInfo

time

date

modSerNo

measMode

cfdLL

cfdLH

cfdZC

cfdHF

synZC

synFD

synHF

tacR

tacG

tacOF

tacLL

tacLH

adcRE

ealDE

ncx

ncy

page

colT

repT

stopt

overfl

useMotor

steps

offset

dither

incr

memBank

modType

synTH

deadTimeComp

polarityL

polarityF