com.sun.media.imageioimpl.plugins.jpeg2000

Class IISRandomAccessIO

java.lang.Object

com.sun.media.imageioimpl.plugins.jpeg2000.IISRandomAccessIO

All Implemented Interfaces:

BinaryDataInput, BinaryDataOutput, RandomAccessIO

public class IISRandomAccessIO
extends Object
implements RandomAccessIO

A wrapper for converting an ImageInputStream into a RandomAccessIO. The resulting class is read-only.

Field Summary

Fields

Modifier and Type	Field and Description
private ImageInputStream	iis The ImageInputStream that is wrapped

Constructor Summary

Constructors

Constructor and Description
IISRandomAccessIO(ImageInputStream iis) Creates a RandomAccessIO instance from the supplied ImageInputStream.

Method Summary

Methods

Modifier and Type	Method and Description
void	close() Closes the I/O stream.
void	flush() A null operation as writing is not supported.
int	getByteOrdering() Returns the endianess (i.e., byte ordering) of the implementing class.
int	getPos() Returns the stream position clamped to a maximum of Integer.MAX_VALUE.
int	length() Returns the length of the data stream.
int	read() Reads a byte of data from the stream.
byte	readByte() Should read a signed byte (i.e., 8 bit) from the input.
double	readDouble() Should read an IEEE double precision (i.e., 64 bit) floating-point number from the input.
float	readFloat() Should read an IEEE single precision (i.e., 32 bit) floating-point number from the input.
void	readFully(byte[] b, int off, int n) Reads up to len bytes of data from this file into an array of bytes.
int	readInt() Should read a signed int (i.e., 32 bit) from the input.
long	readLong() Should read a signed long (i.e., 64 bit) from the input.
short	readShort() Should read a signed short (i.e., 16 bit) from the input.
int	readUnsignedByte() Should read an unsigned byte (i.e., 8 bit) from the input.
long	readUnsignedInt() Should read an unsigned int (i.e., 32 bit) from the input.
int	readUnsignedShort() Should read an unsigned short (i.e., 16 bit) from the input.
void	seek(int off) Moves the current position for the next read or write operation to offset.
int	skipBytes(int n) Skips n bytes from the input.
void	write(int b) Throws an IOException as writing is not supported.
void	writeByte(int v) Throws an IOException as writing is not supported.
void	writeDouble(double v) Throws an IOException as writing is not supported.
void	writeFloat(float v) Throws an IOException as writing is not supported.
void	writeInt(int v) Throws an IOException as writing is not supported.
void	writeLong(long v) Throws an IOException as writing is not supported.
void	writeShort(int v) Throws an IOException as writing is not supported.

Methods inherited from class java.lang.Object

clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

Field Detail

iis

private ImageInputStream iis

The ImageInputStream that is wrapped

Constructor Detail

IISRandomAccessIO

public IISRandomAccessIO(ImageInputStream iis)

Creates a RandomAccessIO instance from the supplied ImageInputStream.

Parameters:

iis - The source ImageInputStream.

Method Detail

close

public void close()
           throws IOException

Description copied from interface: RandomAccessIO

Closes the I/O stream. Prior to closing the stream, any buffered data (at the bit and byte level) should be written.

Specified by:

close in interface RandomAccessIO

Throws:

IOException - If an I/O error ocurred.

getPos

public int getPos()
           throws IOException

Returns the stream position clamped to a maximum of Integer.MAX_VALUE.

Specified by:

getPos in interface RandomAccessIO

Returns:

The offset of the current position, in bytes.

Throws:

IOException - If an I/O error ocurred.

seek

public void seek(int off)
          throws IOException

Description copied from interface: RandomAccessIO

Moves the current position for the next read or write operation to offset. The offset is measured from the beginning of the stream. The offset may be set beyond the end of the file, if in write mode. Setting the offset beyond the end of the file does not change the file length. The file length will change only by writing after the offset has been set beyond the end of the file.

Specified by:

seek in interface RandomAccessIO

Parameters:

off - The offset where to move to.

Throws:

EOFException - If in read-only and seeking beyond EOF.

IOException - If an I/O error ocurred.

length

public int length()
           throws IOException

Returns the length of the data stream.

If the length of the ImageInputStream is not -1, then it is returned after being clamped to a maximum value of Integer.MAX_VALUE. If the ImageInputStream is -1, the stream is read to a maximum position of Integer.MAX_VALUE and its final position is returned. The position of the stream is unchanged from the value it had prior to the call.

Specified by:

length in interface RandomAccessIO

Returns:

The length of the stream, in bytes.

Throws:

IOException - If an I/O error ocurred.

read

public int read()
         throws IOException

Description copied from interface: RandomAccessIO

Reads a byte of data from the stream. Prior to reading, the stream is realigned at the byte level.

Specified by:

read in interface RandomAccessIO

Returns:

The byte read, as an int.

Throws:

EOFException - If the end-of file was reached.

IOException - If an I/O error ocurred.

readFully

public void readFully(byte[] b,
             int off,
             int n)
               throws IOException

Description copied from interface: RandomAccessIO

Reads up to len bytes of data from this file into an array of bytes. This method reads repeatedly from the stream until all the bytes are read. This method blocks until all the bytes are read, the end of the stream is detected, or an exception is thrown.

Specified by:

readFully in interface RandomAccessIO

Parameters:

b - The buffer into which the data is to be read. It must be long enough.

off - The index in 'b' where to place the first byte read.

n - The number of bytes to read.

Throws:

EOFException - If the end-of file was reached before getting all the necessary data.

IOException - If an I/O error ocurred.

getByteOrdering

public int getByteOrdering()

Description copied from interface: BinaryDataInput

Returns the endianess (i.e., byte ordering) of the implementing class. Note that an implementing class may implement only one type of endianness or both, which would be decided at creatiuon time.

Specified by:

getByteOrdering in interface BinaryDataInput

Specified by:

getByteOrdering in interface BinaryDataOutput

Returns:

Either EndianType.BIG_ENDIAN or EndianType.LITTLE_ENDIAN

See Also:

EndianType

readByte

public byte readByte()
              throws IOException

Description copied from interface: BinaryDataInput

Should read a signed byte (i.e., 8 bit) from the input. reading, the input should be realigned at the byte level.

Specified by:

readByte in interface BinaryDataInput

Returns:

The next byte-aligned signed byte (8 bit) from the input.

Throws:

EOFException - If the end-of file was reached before getting all the necessary data.

IOException - If an I/O error ocurred.

readUnsignedByte

public int readUnsignedByte()
                     throws IOException

Description copied from interface: BinaryDataInput

Should read an unsigned byte (i.e., 8 bit) from the input. It is returned as an int since Java does not have an unsigned byte type. Prior to reading, the input should be realigned at the byte level.

Specified by:

readUnsignedByte in interface BinaryDataInput

Returns:

The next byte-aligned unsigned byte (8 bit) from the input, as an int.

Throws:

EOFException - If the end-of file was reached before getting all the necessary data.

IOException - If an I/O error ocurred.

readShort

public short readShort()
                throws IOException

Description copied from interface: BinaryDataInput

Should read a signed short (i.e., 16 bit) from the input. Prior to reading, the input should be realigned at the byte level.

Specified by:

readShort in interface BinaryDataInput

Returns:

The next byte-aligned signed short (16 bit) from the input.

Throws:

EOFException - If the end-of file was reached before getting all the necessary data.

IOException - If an I/O error ocurred.

readUnsignedShort

public int readUnsignedShort()
                      throws IOException

Description copied from interface: BinaryDataInput

Should read an unsigned short (i.e., 16 bit) from the input. It is returned as an int since Java does not have an unsigned short type. Prior to reading, the input should be realigned at the byte level.

Specified by:

readUnsignedShort in interface BinaryDataInput

Returns:

The next byte-aligned unsigned short (16 bit) from the input, as an int.

Throws:

EOFException - If the end-of file was reached before getting all the necessary data.

IOException - If an I/O error ocurred.

readInt

public int readInt()
            throws IOException

Description copied from interface: BinaryDataInput

Should read a signed int (i.e., 32 bit) from the input. Prior to reading, the input should be realigned at the byte level.

Specified by:

readInt in interface BinaryDataInput

Returns:

The next byte-aligned signed int (32 bit) from the input.

Throws:

EOFException - If the end-of file was reached before getting all the necessary data.

IOException - If an I/O error ocurred.

readUnsignedInt

public long readUnsignedInt()
                     throws IOException

Description copied from interface: BinaryDataInput

Should read an unsigned int (i.e., 32 bit) from the input. It is returned as a long since Java does not have an unsigned short type. Prior to reading, the input should be realigned at the byte level.

Specified by:

readUnsignedInt in interface BinaryDataInput

Returns:

The next byte-aligned unsigned int (32 bit) from the input, as a long.

Throws:

EOFException - If the end-of file was reached before getting all the necessary data.

IOException - If an I/O error ocurred.

readLong

public long readLong()
              throws IOException

Description copied from interface: BinaryDataInput

Should read a signed long (i.e., 64 bit) from the input. Prior to reading, the input should be realigned at the byte level.

Specified by:

readLong in interface BinaryDataInput

Returns:

The next byte-aligned signed long (64 bit) from the input.

Throws:

EOFException - If the end-of file was reached before getting all the necessary data.

IOException - If an I/O error ocurred.

readFloat

public float readFloat()
                throws IOException

Description copied from interface: BinaryDataInput

Should read an IEEE single precision (i.e., 32 bit) floating-point number from the input. Prior to reading, the input should be realigned at the byte level.

Specified by:

readFloat in interface BinaryDataInput

Returns:

The next byte-aligned IEEE float (32 bit) from the input.

Throws:

EOFException - If the end-of file was reached before getting all the necessary data.

IOException - If an I/O error ocurred.

readDouble

public double readDouble()
                  throws IOException

Description copied from interface: BinaryDataInput

Should read an IEEE double precision (i.e., 64 bit) floating-point number from the input. Prior to reading, the input should be realigned at the byte level.

Specified by:

readDouble in interface BinaryDataInput

Returns:

The next byte-aligned IEEE double (64 bit) from the input.

Throws:

EOFException - If the end-of file was reached before getting all the necessary data.

IOException - If an I/O error ocurred.

skipBytes

public int skipBytes(int n)
              throws IOException

Description copied from interface: BinaryDataInput

Skips n bytes from the input. Prior to skipping, the input should be realigned at the byte level.

Specified by:

skipBytes in interface BinaryDataInput

Parameters:

n - The number of bytes to skip

Throws:

EOFException - If the end-of file was reached before all the bytes could be skipped.

IOException - If an I/O error ocurred.

flush

public void flush()

A null operation as writing is not supported.

Specified by:

flush in interface BinaryDataOutput

write

public void write(int b)
           throws IOException

Throws an IOException as writing is not supported.

Specified by:

write in interface RandomAccessIO

Parameters:

b - The byte to write. The lower 8 bits of b are written.

Throws:

IOException - If an I/O error ocurred.

writeByte

public void writeByte(int v)
               throws IOException

Throws an IOException as writing is not supported.

Specified by:

writeByte in interface BinaryDataOutput

Parameters:

v - The value to write to the output

Throws:

IOException - If an I/O error ocurred.

writeShort

public void writeShort(int v)
                throws IOException

Throws an IOException as writing is not supported.

Specified by:

writeShort in interface BinaryDataOutput

Parameters:

v - The value to write to the output

Throws:

IOException - If an I/O error ocurred.

writeInt

public void writeInt(int v)
              throws IOException

Throws an IOException as writing is not supported.

Specified by:

writeInt in interface BinaryDataOutput

Parameters:

v - The value to write to the output

Throws:

IOException - If an I/O error ocurred.

writeLong

public void writeLong(long v)
               throws IOException

Throws an IOException as writing is not supported.

Specified by:

writeLong in interface BinaryDataOutput

Parameters:

v - The value to write to the output

Throws:

IOException - If an I/O error ocurred.

writeFloat

public void writeFloat(float v)
                throws IOException

Throws an IOException as writing is not supported.

Specified by:

writeFloat in interface BinaryDataOutput

Parameters:

v - The value to write to the output

Throws:

IOException - If an I/O error ocurred.

writeDouble

public void writeDouble(double v)
                 throws IOException

Throws an IOException as writing is not supported.

Specified by:

writeDouble in interface BinaryDataOutput

Parameters:

v - The value to write to the output

Throws:

IOException - If an I/O error ocurred.