jj2000.j2k.quantization.quantizer

Class StdQuantizer

java.lang.Object

jj2000.j2k.image.ImgDataAdapter

jj2000.j2k.quantization.quantizer.Quantizer

jj2000.j2k.quantization.quantizer.StdQuantizer

All Implemented Interfaces:

ImgData, CBlkQuantDataSrcEnc, ForwWTDataProps

public class StdQuantizer
extends Quantizer

This class implements scalar quantization of integer or floating-point valued source data. The source data is the wavelet transformed image data and the output is the quantized wavelet coefficients represented in sign-magnitude (see below).

Sign magnitude representation is used (instead of two's complement) for the output data. The most significant bit is used for the sign (0 if positive, 1 if negative). Then the magnitude of the quantized coefficient is stored in the next M most significat bits. The rest of the bits (least significant bits) can contain a fractional value of the quantized coefficient. This fractional value is not to be coded by the entropy coder. However, it can be used to compute rate-distortion measures with greater precision.

The value of M is determined for each subband as the sum of the number of guard bits G and the nominal range of quantized wavelet coefficients in the corresponding subband (Rq), minus 1:

M = G + Rq -1

The value of G should be the same for all subbands. The value of Rq depends on the quantization step size, the nominal range of the component before the wavelet transform and the analysis gain of the subband (see Subband).

The blocks of data that are requested should not cross subband boundaries.

See Also:

Subband, Quantizer

Field Summary

Fields

Modifier and Type	Field and Description
static int	QSTEP_EXPONENT_BITS The number of exponent bits for the quantization steps
static int	QSTEP_MANTISSA_BITS The number of mantissa bits for the quantization steps
static int	QSTEP_MAX_EXPONENT The maximum value of the exponent for the quantization steps
static int	QSTEP_MAX_MANTISSA The maximum value of the mantissa for the quantization steps

Fields inherited from class jj2000.j2k.quantization.quantizer.Quantizer

OPT_PREFIX, src

Fields inherited from class jj2000.j2k.image.ImgDataAdapter

imgdatasrc, tIdx

Constructor Summary

Constructors

Constructor and Description
StdQuantizer(CBlkWTDataSrc src, J2KImageWriteParamJava wp) Initializes the source of wavelet transform coefficients.

Method Summary

Methods

Modifier and Type	Method and Description
protected void	calcSbParams(SubbandAn sb, int c) Calculates the parameters of the SubbandAn objects that depend on the Quantizer.
static int	convertToExpMantissa(float step) Converts the floating point value to its exponent-mantissa representation.
int	getMaxMagBits(int c) Returns the maximum number of magnitude bits in any subband of the current tile.
CBlkWTData	getNextCodeBlock(int c, CBlkWTData cblk) Returns the next code-block in the current tile for the specified component, as a copy (see below).
CBlkWTData	getNextInternCodeBlock(int c, CBlkWTData cblk) Returns the next code-block in the current tile for the specified component.
int	getNumGuardBits(int t, int c) Returns the number of guard bits used by this quantizer in the given tile-component.
QuantTypeSpec	getQuantTypeSpec() Returns the quantization type spec object associated to the quantizer.
boolean	isDerived(int t, int c) Returns true if given tile-component uses derived quantization step sizes.
boolean	isReversible(int t, int c) Returns true if the quantized data is reversible, for the specified tile-component.

Methods inherited from class jj2000.j2k.quantization.quantizer.Quantizer

createInstance, getAnSubbandTree, getCbULX, getCbULY, getParameterInfo

Methods inherited from class jj2000.j2k.image.ImgDataAdapter

getCompImgHeight, getCompImgWidth, getCompSubsX, getCompSubsY, getCompULX, getCompULY, getImgHeight, getImgULX, getImgULY, getImgWidth, getNomRangeBits, getNomTileHeight, getNomTileWidth, getNumComps, getNumTiles, getNumTiles, getTile, getTileCompHeight, getTileCompWidth, getTileHeight, getTileIdx, getTilePartULX, getTilePartULY, getTileWidth, nextTile, setTile

Methods inherited from class java.lang.Object

clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

Methods inherited from interface jj2000.j2k.image.ImgData

getCompImgHeight, getCompImgWidth, getCompSubsX, getCompSubsY, getCompULX, getCompULY, getImgHeight, getImgULX, getImgULY, getImgWidth, getNomRangeBits, getNomTileHeight, getNomTileWidth, getNumComps, getNumTiles, getNumTiles, getTile, getTileCompHeight, getTileCompWidth, getTileHeight, getTileIdx, getTilePartULX, getTilePartULY, getTileWidth, nextTile, setTile

Field Detail

QSTEP_MANTISSA_BITS

public static final int QSTEP_MANTISSA_BITS

The number of mantissa bits for the quantization steps

See Also:

Constant Field Values

QSTEP_EXPONENT_BITS

public static final int QSTEP_EXPONENT_BITS

The number of exponent bits for the quantization steps

See Also:

Constant Field Values

QSTEP_MAX_MANTISSA

public static final int QSTEP_MAX_MANTISSA

The maximum value of the mantissa for the quantization steps

See Also:

Constant Field Values

QSTEP_MAX_EXPONENT

public static final int QSTEP_MAX_EXPONENT

The maximum value of the exponent for the quantization steps

See Also:

Constant Field Values

Constructor Detail

StdQuantizer

public StdQuantizer(CBlkWTDataSrc src,
            J2KImageWriteParamJava wp)

Initializes the source of wavelet transform coefficients. The constructor takes information on whether the quantizer is in reversible, derived or expounded mode. If the quantizer is reversible the value of 'derived' is ignored. If the source data is not integer (int) then the quantizer can not be reversible.

After initializing member attributes, getAnSubbandTree is called for all components setting the 'stepWMSE' for all subbands in the current tile.

Parameters:

src - The source of wavelet transform coefficients.

encSpec - The encoder specifications

Method Detail

getQuantTypeSpec

public QuantTypeSpec getQuantTypeSpec()

Returns the quantization type spec object associated to the quantizer.

Returns:

The quantization type spec

getNumGuardBits

public int getNumGuardBits(int t,
                  int c)

Returns the number of guard bits used by this quantizer in the given tile-component.

Specified by:

getNumGuardBits in class Quantizer

Parameters:

t - Tile index

c - Component index

Returns:

The number of guard bits

isReversible

public boolean isReversible(int t,
                   int c)

Returns true if the quantized data is reversible, for the specified tile-component. For the quantized data to be reversible it is necessary and sufficient that the quantization is reversible.

Parameters:

t - The tile to test for reversibility

c - The component to test for reversibility

Returns:

True if the quantized data is reversible, false if not.

isDerived

public boolean isDerived(int t,
                int c)

Returns true if given tile-component uses derived quantization step sizes.

Specified by:

isDerived in class Quantizer

Parameters:

t - Tile index

c - Component index

Returns:

True if derived

getNextCodeBlock

public CBlkWTData getNextCodeBlock(int c,
                          CBlkWTData cblk)

Returns the next code-block in the current tile for the specified component, as a copy (see below). The order in which code-blocks are returned is not specified. However each code-block is returned only once and all code-blocks will be returned if the method is called 'N' times, where 'N' is the number of code-blocks in the tile. After all the code-blocks have been returned for the current tile calls to this method will return 'null'.

When changing the current tile (through 'setTile()' or 'nextTile()') this method will always return the first code-block, as if this method was never called before for the new current tile.

The data returned by this method is always a copy of the data. Therfore it can be modified "in place" without any problems after being returned. The 'offset' of the returned data is 0, and the 'scanw' is the same as the code-block width. See the 'CBlkWTData' class.

The 'ulx' and 'uly' members of the returned 'CBlkWTData' object contain the coordinates of the top-left corner of the block, with respect to the tile, not the subband.

Parameters:

c - The component for which to return the next code-block.

cblk - If non-null this object will be used to return the new code-block. If null a new one will be allocated and returned. If the "data" array of the object is non-null it will be reused, if possible, to return the data.

Returns:

The next code-block in the current tile for component 'n', or null if all code-blocks for the current tile have been returned.

See Also:

CBlkWTData

getNextInternCodeBlock

public final CBlkWTData getNextInternCodeBlock(int c,
                                CBlkWTData cblk)

Returns the next code-block in the current tile for the specified component. The order in which code-blocks are returned is not specified. However each code-block is returned only once and all code-blocks will be returned if the method is called 'N' times, where 'N' is the number of code-blocks in the tile. After all the code-blocks have been returned for the current tile calls to this method will return 'null'.

When changing the current tile (through 'setTile()' or 'nextTile()') this method will always return the first code-block, as if this method was never called before for the new current tile.

The data returned by this method can be the data in the internal buffer of this object, if any, and thus can not be modified by the caller. The 'offset' and 'scanw' of the returned data can be arbitrary. See the 'CBlkWTData' class.

The 'ulx' and 'uly' members of the returned 'CBlkWTData' object contain the coordinates of the top-left corner of the block, with respect to the tile, not the subband.

Parameters:

c - The component for which to return the next code-block.

cblk - If non-null this object will be used to return the new code-block. If null a new one will be allocated and returned. If the "data" array of the object is non-null it will be reused, if possible, to return the data.

Returns:

The next code-block in the current tile for component 'n', or null if all code-blocks for the current tile have been returned.

See Also:

CBlkWTData

calcSbParams

protected void calcSbParams(SubbandAn sb,
                int c)

Calculates the parameters of the SubbandAn objects that depend on the Quantizer. The 'stepWMSE' field is calculated for each subband which is a leaf in the tree rooted at 'sb', for the specified component. The subband tree 'sb' must be the one for the component 'n'.

Specified by:

calcSbParams in class Quantizer

Parameters:

sb - The root of the subband tree.

c - The component index

See Also:

SubbandAn.stepWMSE

convertToExpMantissa

public static int convertToExpMantissa(float step)

Converts the floating point value to its exponent-mantissa representation. The mantissa occupies the 11 least significant bits (bits 10-0), and the exponent the previous 5 bits (bits 15-11).

Parameters:

step - The quantization step, normalized to a dynamic range of 1.

Returns:

The exponent mantissa representation of the step.

getMaxMagBits

public int getMaxMagBits(int c)

Returns the maximum number of magnitude bits in any subband of the current tile.

Specified by:

getMaxMagBits in class Quantizer

Parameters:

c - the component number

Returns:

The maximum number of magnitude bits in all subbands of the current tile.